{"title":"Stickbait Rod","description":"\u003cp\u003eSaltwater rods designed around working floating or sinking stickbaits with controlled sweeps, pauses and retrieves. Compare each model’s reel configuration, rigged-lure range, line reference and specification status before choosing.\u003c\/p\u003e","products":[{"product_id":"goofish-saltwater-stickbait-rod","title":"GOOFISH® Wavearc 82MH Saltwater Stickbait Rod","description":"\u003ch2\u003eAnnotated complete-rod and section concepts\u003c\/h2\u003e\u003cp\u003eThese photographic-style design illustrations add English specification labels to the existing engineering brief. They are not stock photographs, scale drawings or verified FUJI component photographs. Guide positions and drawn section proportions are illustrative; the written candidate bill of materials and approved supplier drawings govern.\u003c\/p\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/rod-backfill-wavearc-whole-final-f5090a38.png?v=1793360700\" width=\"1264\" height=\"848\" alt=\"GOOFISH Wavearc 82MH: complete assembled spinning rod concept with length and rating labels\" style=\"max-width:100%;height:auto\" loading=\"eager\"\u003e\u003cfigcaption\u003eComplete assembled spinning rod appearance with the existing length, Action, Power and lure or suspended-rig targets. Guide count and stations in this overview are illustrative, not a production layout.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/rod-backfill-wavearc-sections.png?v=1793360067\" width=\"1264\" height=\"848\" alt=\"GOOFISH Wavearc 82MH: separate rod sections with assembly and transport-development labels\" style=\"max-width:100%;height:auto\" loading=\"lazy\"\u003e\u003cfigcaption\u003eSeparate-section concept. Composite joint fit, engagement, wall schedule and cutting dimensions require engineering approval. Any stated longest-section value is an unmeasured development goal. Loose sections may be rotated; the assembled guide plane governs installation.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eThe GOOFISH® Wavearc 82MH is a saltwater stickbait spinning rod design for controlled sweeps, pauses and retrieves with floating or sinking stickbaits. Its proposed 2.49 m two-piece format combines a 40–100 g rigged-lure target with PE3–5, MH power and Moderate-Fast action. Wavearc names the lure's sweeping path; 82 denotes the approximately 8 ft 2 in format, while the controlling design length is 2.49 m.\u003c\/p\u003e\u003cp\u003eThis listing contains design targets awaiting sample approval. Generated images are concept visualizations, not photographs of manufactured stock, exact FUJI part drawings or proof of measured performance.\u003c\/p\u003e\u003ch2\u003eDesign philosophy: control without an excessively rigid tip\u003c\/h2\u003e\u003cp\u003eWavearc is intended to sit above a lighter popping outfit in rigged-lure range while focusing on stickbait control rather than repeated heavy cupped-popper loads. The tip should support controlled sweeps without excessive resistance, with progressive loading into the middle and butt. A two-piece layout supports transport, but actual packed length depends on the final joint design. The proposed equal-section put-over joint must be validated before production.\u003c\/p\u003e\u003ch2\u003eRecommended specification and selection parameters\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eProposed target \/ verification status\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eSpinning with a triggerless pipe reel seat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength \/ sections\u003c\/td\u003e\n\u003ctd\u003e2.49 m, two approximately equal sections; packed length unmeasured\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRigged lure range\u003c\/td\u003e\n\u003ctd\u003e40–100 g including hooks, split rings and all attached hardware; casting and comfortable working ranges require separate testing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine class\u003c\/td\u003e\n\u003ctd\u003ePE3–5 target; not a guaranteed breaking strain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eMH \/ Medium Heavy target; not inferred from fish weight or lure weight alone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAction\u003c\/td\u003e\n\u003ctd\u003eModerate-Fast target; controlled progressive midsection engagement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrip\u003c\/td\u003e\n\u003ctd\u003eCharcoal EVA split grip with a shallow longitudinal surface channel on the rear grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnassigned operating values\u003c\/td\u003e\n\u003ctd\u003eSafe working drag, maximum drag, finished mass, blank diameters, recovery measurements and lifting limits are not verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eAction, Power and bending-profile requirements\u003c\/h2\u003e\u003cp\u003eAction describes where bending develops under a stated load; Power describes resistance to deflection. Recovery speed and damping must be evaluated separately. The Moderate-Fast target requires the upper section to initiate loading and then engage the midsection smoothly during casting and sustained loading, without a sharp hinge at the joint. It must not be replaced by a marketing label such as 7:3 or 2:8 without a defined test method.\u003c\/p\u003e\u003cp\u003eRecord the support span, rod angle, load direction and incremental load for each deflection comparison. Compare samples against an agreed MH reference and record recovery consistently. Do not force a nominal action label if casting and lure-control trials show the taper needs revision. A rendered bend curve cannot certify a physical rod.\u003c\/p\u003e\u003ch2\u003eProposed FUJI bill of materials\u003c\/h2\u003e\u003cp\u003eCatalog identities below are supported by the Anglers Resource FUJI component listings. They are proposed parts, not confirmed installed components. The supplier must confirm genuine sourcing, current size-specific ordering codes and compatibility before approving the build.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003cth\u003eCandidate model \/ initial sample layout\u003c\/th\u003e\n\u003cth\u003eWhat must be checked\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReduction guide train\u003c\/td\u003e\n\u003ctd\u003eFUJI TKWSG-S titanium frame \/ Slim SiC insert; nominal sizes 30, 20 and 12, one each proposed\u003c\/td\u003e\n\u003ctd\u003eConfirm each catalog size\/order code; use actual reel spool diameter, spool position, braid and leader knot to determine final layout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRunning guides\u003c\/td\u003e\n\u003ctd\u003eFUJI TKTSG titanium \/ Slim SiC, nominal size 10; initially five runners proposed\u003c\/td\u003e\n\u003ctd\u003eEight guides plus a tip-top is an initial sample arrangement only. Adjust guide count and spacing after load-path and casting tests\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip-top\u003c\/td\u003e\n\u003ctd\u003eFUJI TMNST titanium \/ SiC, nominal ring size 10 proposed\u003c\/td\u003e\n\u003ctd\u003eTube size is deliberately unassigned until the finished blank tip is measured. Ring size does not determine tube bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel seat\u003c\/td\u003e\n\u003ctd\u003eFUJI DPSM20BC with gunsmoke hood; catalog dimensions: 20.0 mm inside diameter, 23.0 mm outside diameter and 129 mm length\u003c\/td\u003e\n\u003ctd\u003eCatalog dimensions are component data, not rod measurements. Confirm blank fit, bonded arbor design, reel-foot clearance and full locking engagement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eDo not paint or machine genuine FUJI guide frames, inserts or locking hardware for decorative color matching. Retain the catalog finish. Titanium frames and named inserts do not by themselves establish whole-rod durability, corrosion resistance or a safe drag value.\u003c\/p\u003e\u003ch3\u003eComponent sources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/anglersresource.net\/product_categories\/k-series-new-guide-concept-guides\/\" title=\"FUJI TKWSG-S K-Series guide reference\"\u003eTKWSG-S guide catalog\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/anglersresource.net\/product_categories\/k-series-running-guides\/\" title=\"FUJI TKTSG running guide reference\"\u003eTKTSG runner catalog\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/anglersresource.net\/product_categories\/tops-for-spinning-casting\/\" title=\"FUJI TMNST tip-top reference\"\u003eTMNST tip-top catalog\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/anglersresource.net\/product_categories\/spinning-reel-seats\/\" title=\"FUJI DPSM20BC reel-seat dimensions\"\u003eDPSM reel-seat catalog\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEight-part technical design requirements\u003c\/h2\u003e\u003ch3\u003e01 Tip and tip-top\u003c\/h3\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/rod-backfill-wavearc-01-02.png?v=1793360066\" width=\"1264\" height=\"848\" alt=\"GOOFISH Wavearc 82MH: Tip-top and guide component concepts\" style=\"max-width:100%;height:auto\" loading=\"lazy\"\u003e\u003cfigcaption\u003e01 tip-top and 02 guide details with candidate FUJI identities and trial counts. The illustrated frames are enlarged generic shape studies, not exact catalog part photographs. Tube bore, actual part geometry, guide spacing and reel\/line compatibility require verification.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eEvaluate loading with fully rigged lures at the lower, middle and upper design targets. The tip should support deliberate sweeps without collapsing or forcing excessively abrupt lure acceleration. Fit the TMNST tube to measured tip geometry; inspect insert edges, bonding and alignment. Blank tip construction and tube size must not be guessed from the illustration.\u003c\/p\u003e\u003ch3\u003e02 Guides and wraps\u003c\/h3\u003e\u003cp\u003eRun a static line-path evaluation through the agreed working envelope to check blank clearance. Test knot passage, line slap and tangling during casting with the intended reel and leader. Inspect each frame, insert, foot preparation, wrapping and cured finish. Do not copy rendered guide positions as production spacing.\u003c\/p\u003e\u003ch3\u003e03 Blank and taper\u003c\/h3\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/rod-backfill-wavearc-03-04-final-b9d1abda.png?v=1793360699\" width=\"1264\" height=\"848\" alt=\"GOOFISH Wavearc 82MH: Blank identity and composite put-over joint concepts\" style=\"max-width:100%;height:auto\" loading=\"lazy\"\u003e\u003cfigcaption\u003e03 lower-blank graphics and 04 assembled put-over joint styling. Socket ID, male OD, engagement, wall thickness and tolerances remain subject to engineering; no external metal socket is specified by this concept.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eDevelop the taper and reinforcement around the MH \/ Moderate-Fast targets and realistic stickbait resistance. Verify recovery and load transfer through the joint. Blank material, modulus, resin system and Solid Nano construction are not established for this model and must not be borrowed from existing rods.\u003c\/p\u003e\u003ch3\u003e04 Joint\u003c\/h3\u003e\u003cp\u003eUse sample-specific engagement and fit criteria for the proposed put-over connection. Confirm assembly alignment, repeat fit, loosening and stress concentration. Do not apply a spigot-gap specification to a different joint type. Final tolerances and reinforcement belong in supplier-approved engineering documents.\u003c\/p\u003e\u003ch3\u003e05 Foregrip\u003c\/h3\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/rod-backfill-wavearc-05-06.png?v=1793360066\" width=\"1264\" height=\"848\" alt=\"GOOFISH Wavearc 82MH: Foregrip and reel-seat component concepts\" style=\"max-width:100%;height:auto\" loading=\"lazy\"\u003e\u003cfigcaption\u003e05 EVA foregrip and 06 reel-seat details. Catalog bore, OD and body-length references identify candidate hardware, not finished-rod measurements or whole-rod compatibility. Confirm the actual reel foot, arbor bond, locking travel and the written grip targets on physical samples.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eUse a short EVA support grip that leaves the locking hood accessible and does not interfere with hand placement. Determine dimensions through handling trials. Grip length is not authorization to high-stick or lift fish with the rod.\u003c\/p\u003e\u003ch3\u003e06 Reel seat\u003c\/h3\u003e\u003cp\u003eUse the triggerless DPSM20BC candidate. Test real reel feet rather than assuming compatibility from a generic reel size. Confirm hood engagement, bonded arbors and absence of rocking or loosening under repeated lure work.\u003c\/p\u003e\u003ch3\u003e07 Rear grip\u003c\/h3\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/rod-backfill-wavearc-07-08-final-96179d5f.png?v=1793360699\" width=\"1264\" height=\"848\" alt=\"GOOFISH Wavearc 82MH: Rear EVA and GOOFISH butt-cap end-face concepts\" style=\"max-width:100%;height:auto\" loading=\"lazy\"\u003e\u003cfigcaption\u003e07 rear EVA and 08 butt-cap end face. Use the GOOFISH wordmark with the model-specific secondary motif below it, not a motif alone. Final lettering uses an approved vector; print size, materials, durability and separate finish samples require approval.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eEstablish reel-foot-center-to-butt length by two-handed casting and sweep-clearance trials. The proposed shallow longitudinal EVA channel is an exterior grip treatment, not a cut in the blank or reel seat. Confirm comfort, adhesive assembly and durability on samples.\u003c\/p\u003e\u003ch3\u003e08 Butt cap and trim\u003c\/h3\u003e\u003cp\u003eUse a rounded protective cap with a recessed split-arc emblem. Avoid protruding ornaments and sharp trim edges. Confirm bonding and mass distribution. Decorative sealing does not establish a waterproof rod.\u003c\/p\u003e\u003ch2\u003eGOOFISH Split-Arc visual identity\u003c\/h2\u003e\u003cp\u003eWavearc uses one restrained pair of interrupted arc strokes on the butt section, rather than a full-length pattern. Place an approved GOOFISH wordmark and smaller Wavearc 82MH identifier beside the artwork, with a separate compact specification panel. Use matching joint-alignment ticks, narrow wrap borders and the recessed split-arc butt emblem as repeatable brand details. Keep the upper blank visually quiet. This is a proposed GOOFISH design direction, not a patent or a claim of market-wide uniqueness.\u003c\/p\u003e\u003ch2\u003eColor placement and PANTONE sampling references\u003c\/h2\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/rod-backfill-wavearc-color1-final-ecfca961.png?v=1793360700\" width=\"1264\" height=\"848\" alt=\"GOOFISH Wavearc 82MH: Aubergine Mist finish concept with English material and color-reference labels\" style=\"max-width:100%;height:auto\" loading=\"lazy\"\u003e\u003cfigcaption\u003eAubergine Mist appearance direction. PANTONE references are sampling references, not paint formulas or verified render matches. Approve paint, metallic trim and charcoal EVA separately on their actual substrates. The seat remains a stylized candidate-hardware study.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/rod-backfill-wavearc-color2-final-b90ed1b9.png?v=1793360700\" width=\"1264\" height=\"848\" alt=\"GOOFISH Wavearc 82MH: Petrol Shadow finish concept with English material and color-reference labels\" style=\"max-width:100%;height:auto\" loading=\"lazy\"\u003e\u003cfigcaption\u003ePetrol Shadow appearance direction. PANTONE references are sampling references, not paint formulas or verified render matches. Approve paint, metallic trim and charcoal EVA separately on their actual substrates. The seat remains a stylized candidate-hardware study.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eAubergine Mist\u003c\/th\u003e\n\u003cth\u003ePetrol Shadow\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-gloss blank base\u003c\/td\u003e\n\u003ctd\u003ePANTONE Warm Gray 1 C reference\u003c\/td\u003e\n\u003ctd\u003ePANTONE 432 C reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSplit-arc butt artwork\u003c\/td\u003e\n\u003ctd\u003ePANTONE 5195 C reference\u003c\/td\u003e\n\u003ctd\u003ePANTONE 3165 C reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGOOFISH wordmark \/ model text\u003c\/td\u003e\n\u003ctd\u003ePANTONE 5195 C reference\u003c\/td\u003e\n\u003ctd\u003ePANTONE Warm Gray 1 C reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint ticks \/ narrow wrap border\u003c\/td\u003e\n\u003ctd\u003ePANTONE 5195 C reference\u003c\/td\u003e\n\u003ctd\u003ePANTONE 3165 C reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall nonstructural trim\u003c\/td\u003e\n\u003ctd\u003ePANTONE 876 C metallic visual reference\u003c\/td\u003e\n\u003ctd\u003eUnpainted satin silver master sample; no fabricated PANTONE equivalence\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEVA \/ cap body\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eCharcoal visual direction referencing 432 C only; approve actual EVA and cap material samples separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed cap emblem if filled\u003c\/td\u003e\n\u003ctd\u003ePANTONE 5195 C reference\u003c\/td\u003e\n\u003ctd\u003ePANTONE 3165 C reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFUJI frames \/ insert \/ seat hardware\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eOriginal genuine component finish, not recolored to a PANTONE code\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eMatte coating, metallic trim and EVA approval\u003c\/h3\u003e\u003cp\u003eUse genuine physical PANTONE standards, not screenshots or generated swatches. Warm Gray 1 C, 432 C, 5195 C and 3165 C are Solid Coated references; 876 C is a Metallics Coated reference. These references do not prescribe a rod-paint formula, EVA compound or anodizing process.\u003c\/p\u003e\u003cp\u003eFor low-gloss coatings, approve cured coated coupons on the actual substrate with the final clearcoat and surface texture. For metallic trim, approve the real metal finish under multiple viewing angles; metallic pigment and anodizing need not match a printed metallic reference identically. For EVA, approve density, texture, compression and a physical color master, then compare the assembled grip in the full outfit. Evaluate cured thread colors separately because resin can alter their appearance.\u003c\/p\u003e\u003cp\u003eAgree measurable color, gloss, adhesion and wear criteria with the supplier after physical samples. Do not invent a universal Delta E tolerance or gloss value. Keep approved master samples for batch comparison. Renders do not constitute PANTONE-certified color matching.\u003c\/p\u003e\u003ch2\u003eIntended fishing methods and environments\u003c\/h2\u003e\u003cp\u003eProposed applications are controlled sweeps, pauses and retrieves with floating or sinking stickbaits from an open boat deck, clear shoreline or accessible rocky coast with a safe landing plan. Current seams, bait schools and open-water edges are candidate situations, not guarantees that fish will be present. Conditions, casting clearance, wind, current and lure resistance determine whether the outfit is appropriate.\u003c\/p\u003e\u003cp\u003eSmall-to-medium yellowtail, appropriately sized trevally and smaller tuna are candidate applications only, subject to verified working limits, local conditions and landing access. Fish species alone cannot establish rod suitability. This is not a large-tuna, heavy-GT, surf-distance, trolling or deep-water vertical-jigging specification. A large cupped popper can produce a substantially different working load than a stickbait of the same mass.\u003c\/p\u003e\u003ch2\u003eChoose your variant and outfit\u003c\/h2\u003e\u003cp\u003eSelect Aubergine Mist or Petrol Shadow. Both proposed color variants share 2.49 m \/ two-piece construction and MH \/ Moderate-Fast \/ 40–100 g targets with PE3–5. Fixed specification attributes make the choice explicit rather than creating untested length or power alternatives.\u003c\/p\u003e\u003cp\u003eWeigh the fully rigged lure. Verify comfortable lure-working range separately from the casting range. Match measured reel capacity, line diameter, seat fit and outfit balance; PE class is not a breaking-strength guarantee. Confirm leader-knot passage through the size-specific guide train. Set drag only from verified operating guidance for the completed outfit, never from a guessed fish weight.\u003c\/p\u003e\u003ch2\u003eSupplier verification checklist before sale\u003c\/h2\u003e\u003cp\u003eRecord actual assembled and packed lengths, finished mass, balance, tip and butt diameters, grip dimensions, genuine part codes, final guide train, joint engagement and reel-seat fit. Approve measured load-deflection behavior, recovery, casting and lure-control performance using documented methods. Controlled structural and durability assessments require manufacturer-defined procedures and acceptance criteria, not an improvised lifting demonstration. No usable drag or maximum fish-weight claim is assigned without those results.\u003c\/p\u003e\u003ch2\u003eQuestions before choosing Wavearc\u003c\/h2\u003e\u003ch3\u003eHow does it differ from a light popping rod?\u003c\/h3\u003e\u003cp\u003eThe proposed role is a higher rigged-lure range and more progressive stickbait-oriented loading, not simply a color change. The intended taper must prove that distinction in sample trials.\u003c\/p\u003e\u003ch3\u003eAre FUJI parts and performance already confirmed on a finished rod?\u003c\/h3\u003e\u003cp\u003eNo. The named catalog components are proposed procurement candidates. Actual parts, fit and whole-rod performance await supplier approval.\u003c\/p\u003e\u003ch3\u003eAre the images photographs of stock?\u003c\/h3\u003e\u003cp\u003eNo. They communicate proposed appearance and component locations. Use the written component specification and genuine FUJI geometry, not rendered part shapes, for engineering.\u003c\/p\u003e","brand":"Goofish® Rod-More Than Fishing","offers":[{"title":"Aubergine Mist \/ 2.49 m \/ 2-Piece \/ MH \/ Moderate-Fast \/ 40-100 g","offer_id":50844651192517,"sku":"WA82MH-AM","price":279.0,"currency_code":"USD","in_stock":false},{"title":"Petrol Shadow \/ 2.49 m \/ 2-Piece \/ MH \/ Moderate-Fast \/ 40-100 g","offer_id":50844651225285,"sku":"WA82MH-PS","price":279.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/rod-backfill-wavearc-whole-final-f5090a38.png?v=1793360700"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/collections\/category-stickbait-navy-20261107.png?v=1794059066","url":"https:\/\/goofishrod.com\/collections\/stickbait-rod.oembed","provider":"Goofish® Rod-More than fishing","version":"1.0","type":"link"}