{"product_id":"goofish-trailfold-705-5-piece-travel-spinning-rod","title":"GOOFISH® TRAILFOLD 705 Five-Piece Travel Spinning Rod — Design Concept","description":"\u003cp\u003eThe GOOFISH TRAILFOLD 705 is a five-piece travel spinning rod concept built around a compact hiking and backpacking setup: one straight cork handle section, four tapered upper sections and a single Graphite Moss finish. Its development targets combine a 210cm assembled length with a longest separate section of 47cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDevelopment concept, not a production-ready product.\u003c\/strong\u003e The photographic-style images are generated design renders, not sample photographs or manufacturing drawings. New dimensions, materials, component fit and performance targets require prototype validation. This five-piece direction replaces the earlier four-piece concept.\u003c\/p\u003e\n\u003ch2\u003eFive-piece travel rod layout\u003c\/h2\u003e\u003cp\u003eSeparate rod sections are intended to make packing easier without using a telescopic mechanism. A compact packed-length target does not establish compatibility with every backpack, luggage compartment or airline policy.\u003c\/p\u003e\u003ctable\u003e\n\u003ccaption\u003ePreliminary design targets, not measured production specifications\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFeature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDevelopment specification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eFive-piece, straight-handle spinning rod; no casting trigger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAssembled length\u003c\/th\u003e\n\u003ctd\u003e2100mm target\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate sections\u003c\/th\u003e\n\u003ctd\u003eS1 handle: 470mm; S2: 460mm; S3: 460mm; S4: 460mm; S5 tip: 450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower and action\u003c\/th\u003e\n\u003ctd\u003eSeparate M and MH development options; Fast action target\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGraphite Moss, with natural cork, warm-ivory lettering and restrained silver accents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRatings not yet assigned\u003c\/th\u003e\n\u003ctd\u003eLure weight, line or PE range, finished rod mass, working drag and numerical strength or lifting limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/tf705-approved-en-sections.png?v=1793708940\" alt=\"GOOFISH TRAILFOLD 705 five-piece travel spinning rod concept with one cork handle and four upper sections\" width=\"1264\" height=\"848\" loading=\"lazy\"\u003e\u003cfigcaption\u003eFive-piece layout and untested length targets. Guide positions are illustrative, not a manufacturing layout.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003ch2\u003eStraight spinning handle with natural cork\u003c\/h2\u003e\u003cp\u003eThe handle design uses a long natural-cork rear grip, a triggerless spinning reel seat and a short cork foregrip. Rubberized cork wear zones are proposed. The rear grip, reel seat and foregrip form one handle section only; the other four sections have no additional handles or reel seats.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eButt datum x=0 increases toward the tip. Butt-cap axial target: 15mm, x0–15.\u003c\/li\u003e\n\u003cli\u003eRear cork grip: 200mm target, x15–215.\u003c\/li\u003e\n\u003cli\u003eReel-seat installation envelope: 110mm allowance, x215–325.\u003c\/li\u003e\n\u003cli\u003eForegrip: 40mm target, x325–365.\u003c\/li\u003e\n\u003cli\u003eGrip outside-diameter targets: M 26mm; MH 27mm. Butt-cap outside-diameter targets: M 28mm; MH 29mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe FUJI DPSM16-BC is a procurement candidate, with a graphite body and frosted dark-grey hood appearance. Its catalog body length is 105mm, nominal inside diameter 15.5mm and outside profiles 21.7\/18.3mm. The 105mm component length is not the 110mm installation allowance. Blank fit, arbors, adhesive bondline, hood travel, reel-foot clearance and transitions require separate M\/MH trial assembly before a common seat can be approved. Renders do not reproduce exact manufacturer geometry.\u003c\/p\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/tf705-approved-en-handle.png?v=1793708939\" alt=\"TRAILFOLD 705 straight triggerless spinning handle, natural cork grip and graphite butt cap with the approved stylized GOOFISH logo\" width=\"1264\" height=\"848\" loading=\"lazy\"\u003e\u003cfigcaption\u003eStraight spinning configuration with no casting trigger. Reel-seat geometry and dimension leaders are illustrative; catalog dimensions do not establish installed fit.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003ch2\u003eComposite joints and alignment\u003c\/h2\u003e\u003cp\u003eFour composite put-over joints connect the sections; no external metal ferrule sleeve is specified. The separate lengths total 2300mm. Subtracting four provisional 50mm overlap budgets gives the 2100mm assembled target. These are layout budgets, not approved engagement depths: each joint needs individual taper, bore, wall, reinforcement, insertion-force, clearance, wear-limit and tolerance engineering.\u003c\/p\u003e\u003cp\u003eAlignment ticks target 8 × 1mm on the guide plane. Section IDs S1–S5 and the selected M or MH code target 2mm character height on non-mating outer surfaces. A station 12mm behind a socket lip is provisional; joints without a corresponding socket need their own marking location. Actual guide feet and joint reinforcement take precedence. Do not print, paint or wrap insertion mating surfaces.\u003c\/p\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/tf705-final-en-joints.png?v=1793708840\" alt=\"TRAILFOLD 705 composite put-over joint render showing the socket, bare insertion end and alignment marks\" width=\"1264\" height=\"848\" loading=\"lazy\"\u003e\u003cfigcaption\u003eThe 50mm annotation is a provisional overlap budget, not an approved insertion depth. Keep mating surfaces free of ink and coating.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003ch2\u003eGraphite Moss finish and English markings\u003c\/h2\u003e\u003cp\u003eGraphite-black carbon surfaces, muted moss-green nylon wraps, natural cork and warm-ivory English branding define the single-color design. Small twin bands, a butt-face dash and an optional reverse-side dot motif provide restrained detail without implying additional power or performance ratings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAppearance references: PANTONE 432 C body; 5743 C moss wraps and accents; 7527 C ivory lettering, alignment marks and trim; 877 C silver accent appearance.\u003c\/li\u003e\n\u003cli\u003eApprove separate physical coating, thread, ink and metal masters. Pantone references are not paint formulas, thread product codes or anodizing recipes; rendered swatches and screens are not production color standards. Cork remains undyed.\u003c\/li\u003e\n\u003cli\u003eGuide-wrap length follows the selected foot plus a provisional 2mm beyond each end. Ivory endline target: 1mm; silver accent: 0.5mm. Trial wrapping must confirm end clearance and finish build.\u003c\/li\u003e\n\u003cli\u003eRear-grip-to-seat transition: two moss decorative bands, each 1mm wide with a 1mm clear gap, within the existing installation envelope. Exact axial station follows trial assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRod name, logo and parameter placement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse the merchant-approved stylized GOOFISH wordmark, including its distinctive connected double-O letterform. Retain the approved mark's proportions rather than substituting generic lettering. The rod wordmark has a 30 × 3.5mm target fit box within the x375–405 print zone. Model-name character height: 1.8mm. Parameter-line character height: 1.2mm, maximum 30mm width. Proposed line gaps: 1.5mm.\u003c\/li\u003e\n\u003cli\u003eKeep printing within x405; reserve x420–470 as a preliminary first-joint branding keepout, not a structural insertion or reinforcement specification. Actual joint geometry and guide clearance take precedence.\u003c\/li\u003e\n\u003cli\u003eSeparate English development artwork: “GOOFISH \/ TRAILFOLD 705 \/ 210cm TARGET | 5PC | M FAST” or the MH FAST version. Never print both powers on one production rod. TARGET is a development label; final production text must use approved measured specifications.\u003c\/li\u003e\n\u003cli\u003eButt-face GOOFISH wordmark: use the same approved stylized mark, proportionally fitted within a 16 × 3mm target box and centered in a provisional 20mm print field on a graphite-grey cap. Optional moss dash: 4 × 0.6mm, 3mm below the wordmark bottom edge, with at least 3mm effective edge clearance. Confirm curvature, recess and print adhesion.\u003c\/li\u003e\n\u003cli\u003eOptional reverse-side ivory dots: 0.8mm diameter; centers x410\/412\/414, at 180 degrees from the main print. Decorative only, not a power code. Confirm clearance from guide feet and reinforcement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse approved vector brand artwork, not a logo extracted from a generated image. Trial the actual circumference, ink, surface preparation, cure and small-text legibility. If printing cannot fit clearly, revise the approved print zone and clearances before manufacturing. Repeated labels in any render are illustrative and do not add print operations.\u003c\/p\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/tf705-approved-en-markings.png?v=1793708940\" alt=\"TRAILFOLD 705 English M and MH markings with the approved connected double-O GOOFISH wordmark, butt logo and moss ivory silver trim\" width=\"1264\" height=\"848\" loading=\"lazy\"\u003e\u003cfigcaption\u003eEnglish development markings use the same merchant-approved stylized wordmark on the blank and butt cap. Fit boxes are maximum artwork envelopes, not instructions to distort the logo.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003ch2\u003eGuide and tip-top procurement candidates\u003c\/h2\u003e\u003cp\u003eThe trial layout uses reduction sizes 25H, 12H and 6M, followed by five size-6 running guides and a ring-6 tip-top: eight guides plus tip. Candidate families include FUJI BCKLAG-related reduction guides, BCKTAG runners and a BCLGAT tip-top. Alconite rings and dark-grey BC frame appearance are proposed; the BCLGAT direction uses a stainless frame.\u003c\/p\u003e\u003cp\u003eThis is not an installed, tested bill of materials. In particular, the 6M medium-frame candidate needs its correct family and full supplier order code; it must not be treated as an automatically valid -H high-frame SKU. Confirm size availability, frame material and finish, tip tube bore, component mass and spacing using the actual M\/MH blanks and trial reels. Check spool geometry, static line path, leader-knot clearance, guide feet, joint keepouts and packing space. Do not buy parts solely from rendered shapes.\u003c\/p\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/tf705-final-en-guides.png?v=1793708840\" alt=\"TRAILFOLD 705 candidate reduction guides, running guides and tip-top with moss nylon wrap and ivory silver end trim\" width=\"1264\" height=\"848\" loading=\"lazy\"\u003e\u003cfigcaption\u003eProcurement candidates only, not installed components or manufacturer CAD. Exact 6M order code, spacing, tube bore and fit require confirmation.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003ch2\u003eTravel sleeve and case concepts\u003c\/h2\u003e\u003cp\u003eThe protection direction pairs a five-channel sleeve with a slim semi-rigid case. Separate channels and end padding are intended to keep the five sections organized, but the layout still needs real packing tests.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLongest section: 470mm target.\u003c\/li\u003e\n\u003cli\u003eSleeve external length target: no more than 500mm.\u003c\/li\u003e\n\u003cli\u003eCase external-envelope target: 500 × 75 × 65mm.\u003c\/li\u003e\n\u003cli\u003eThese are untested accessory targets, not shipping dimensions. Verify guide height, reel-seat occupancy, channel clearance, padding and end protection.\u003c\/li\u003e\n\u003cli\u003eFabric, zipper, lining, seams, packaging graphics and final dimensions require approval. Sleeve and case are not confirmed included. No universal backpack or airline fit is claimed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/tf705-approved-en-storage.png?v=1793708940\" alt=\"TRAILFOLD 705 five-channel travel sleeve and moss semi-rigid case concept bearing the approved stylized GOOFISH wordmark\" width=\"1264\" height=\"848\" loading=\"lazy\"\u003e\u003cfigcaption\u003eFive-channel sleeve and case concepts with untested external dimensions. Accessories are not confirmed included.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003ch2\u003ePrototype approval before production\u003c\/h2\u003e\u003cp\u003eThe proposed blank is a carbon-fiber\/epoxy composite; fiber supplier and grade, resin, layup, wall thickness and reinforcement remain unapproved. Natural cork, rubberized cork wear zones, nylon wraps and supplier-approved low-build clear epoxy require material samples. Adhesives, thread specification, coating thickness, cure conditions and acceptance criteria are still to be defined.\u003c\/p\u003e\u003cp\u003ePrototype review must verify full and packed lengths, mass, reel fit, M\/MH bending and action, guide alignment and line path. Repeated joint assembly, axial slip, twist, cyclic loading and transport checks need an engineer-approved guarded plan specifying fixtures, load direction, ramp, hold and pass criteria. Numerical proof loads are not assigned. Concept dimensions do not establish working drag, fish weight, lifting capacity or tested strength.\u003c\/p\u003e\u003cp\u003eComponent references: \u003ca href=\"https:\/\/www.fujitackle.it\/en\/pipe-reel-seat.html\" title=\"FUJI pipe reel seat catalog\"\u003eFUJI reel-seat catalog\u003c\/a\u003e, \u003ca href=\"https:\/\/anglersresource.net\/guides\/general-purpose-guides\/\" title=\"FUJI guide family references\"\u003eguide families\u003c\/a\u003e and \u003ca href=\"https:\/\/www.fujitackle.it\/en\/tip-top-guides-1.html\" title=\"FUJI tip-top family references\"\u003etip-top families\u003c\/a\u003e. Obtain supplier confirmation before procurement. This page records the approved design direction, not a manufacturing release or a verified sale-ready specification.\u003c\/p\u003e","brand":"Goofish® Rod-More Than Fishing","offers":[{"title":"Graphite Moss (Concept) \/ 210cm target - 5 pieces \/ M\u0026F","offer_id":45430353789125,"sku":null,"price":168.8,"currency_code":"USD","in_stock":false},{"title":"Graphite Moss (Concept) \/ 210cm target - 5 pieces \/ MH\u0026F","offer_id":45430353821893,"sku":null,"price":168.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2195\/4723\/files\/tf705-approved-en-sections.png?v=1793708940","url":"https:\/\/goofishrod.com\/products\/goofish-trailfold-705-5-piece-travel-spinning-rod","provider":"Goofish® Rod-More than fishing","version":"1.0","type":"link"}