A dished spring washer is not a spare drag washer. A disc spring provides elastic force as it deflects; a friction drag washer belongs to the surfaces that resist relative movement; a flat shim controls specified spacing. Similar holes and outside diameters do not make these parts interchangeable.
If a reel's parts diagram identifies a conical spring, preserve the specified part, count and orientation. Do not flatten it, reverse the stack or substitute carbon material because another angler's reel uses a different arrangement. The useful first step is identifying the component's job, not chasing a higher drag reading.
Three ring-shaped parts, three different jobs
Disc spring: designed to deflect
A disc spring is an annular, conical spring loaded along its axis. Its shallow dish is part of the working geometry, not automatically evidence of damage. You may encounter terms such as Belleville spring, coned disc spring or spring washer, but wording alone does not identify the exact replacement.
SPIROL's disc-spring explanation describes this geometry and how springs can be used singly or in stacks. That engineering principle explains why a dished component needs identification before anyone tries to make it flat.
It does not mean every curved washer in a reel is a Belleville spring. Wave springs, retaining parts and other shaped components require their own identification. Nor does a hardware-store item sold under a similar name establish the correct material, spring characteristic or fit for a reel.
Drag washer: part of the friction system
A reel's drag provides resistance while allowing controlled line release. Friction washers and their mating surfaces form part of that system; their construction depends on the design. Do not reduce every metal item near the drag to a spacer or every dark ring to carbon material.
Okuma's star-drag explanation describes the adjustment compressing the drag washer to change resistance. This is a functional example, not an assembly diagram for every conventional reel.
For cleaning and lubrication questions concerning friction material, use the separate carbon drag-washer care guide. A spring's engineering lubrication guidance must not become a grease instruction for an unidentified drag stack.
Flat shim: specified spacing, not spring substitution
A flat shim can establish spacing or adjustment at its specified position. Its thickness matters in that assembly. Replacing a conical spring with a flat ring of similar diameter does not preserve the spring's force-and-travel behavior.
The distinction is functional: spring action, frictional resistance and spacing are different tasks, even when parts share a ring-shaped outline. Confirm the manufacturer's description rather than assigning a job from a photograph.

Why the same spring count can behave differently
Disc-spring orientation affects the response of a stack. SPIROL's stack-configuration guide distinguishes series, parallel and combined arrangements.
For equivalent springs considered under the guide's idealized relationships, series stacking adds available deflection at a given force. Parallel stacking adds force at a given deflection. Friction between contacting springs makes the real behavior more complicated than simply multiplying a number.
This is an explanation of spring mechanics, not a way to calculate a reel's line drag from washer count. The surrounding mechanism, fitted components and operating geometry still matter. A spring force is not automatically the force measured at the fishing line.
What this means when reading a teardown
Two photographs can show the same number of conical washers but different arrangements. The count alone cannot establish the same stack height, travel or response. A text pattern made from brackets is also incomplete without knowing which exact components, positions and service instructions it represents.
Do not copy a rearrangement from another model, add an extra spring or remove a shim to make the stack fit. That changes the specified assembly rather than simply restoring a missing component. A larger resistance reading afterward would not, by itself, prove a successful repair.
A practical identification route
- Keep the reel intact for the initial enquiry. Record the exact model and retrieve hand from accessible markings. Do not open it solely to photograph a washer.
- Find the applicable document. Match the model, size and any generation or revision information. Use the listed component description and part number, not only its position in an exploded view.
- Separate identity from condition. First establish what the part is meant to be. A dished spring is not automatically bent damage, while a photograph cannot prove that its spring properties remain correct.
- Confirm the complete requirement. Ask about the specified quantity, orientation, related spacers and any service procedure. A replacement package may contain one item rather than the required set.
- Stop where information stops. If parts were mixed during earlier work or the original arrangement is unknown, leave it unresolved for the manufacturer or qualified repairer.
The reel schematic lookup guide covers document and part-number matching in detail. An exploded drawing helps identify a component; it does not automatically supply assembly orientation, torque or lubrication instructions.
Do not diagnose an entire drag from one loose washer
Unexpected resistance after servicing, a control that binds or erratic line release deserves assessment. Those symptoms do not prove that a spring washer is the cause. Friction surfaces, adjustment and other components may need checking under the model's service procedure.
Avoid bending, heating, sanding or crushing an unidentified spring to change its shape. Do not increase drag to hide inconsistent behavior, and do not run heavy-load experiments through a rigged rod. Stop using a reel that behaves unpredictably until it has been assessed.

Send the repairer the question that matters
A useful enquiry says: “Please identify the component and confirm its specified part number, quantity, orientation and installation requirements for this exact reel.” Add the applicable drawing reference and describe any previous repair or modification.
Keep the observation separate from the diagnosis. “Drag release became inconsistent after service” gives a repairer more useful context than “the Belleville washers need upgrading.” Ask whether the whole reel needs inspection instead of ordering a visually similar spring first.
GOOFISH examples: identify the variant, not just the color
The GOOFISH Edge Jigger 30 jigging reel has eight current selections across two finishes, separate retrieve hands and round-knob or T-bar options. Record the actual selection when requesting support rather than writing only “size 30 gold reel.” Its listed 4.92:1 gearing identifies a retrieve specification, not the internal spring arrangement.
The Abyss Jigger Gen 1 saltwater jigging reel separately lists Blue/Silver and Navy Blue/Gold with left- or right-hand retrieve, giving four combinations. Its 6.08:1 ratio and 300m of 0.37mm line-capacity reference distinguish purchasing details; they do not identify a compatible washer kit.
Neither listing establishes an interchangeable spring stack between these reels or with another brand. Choose complete reels for their intended fishing application and confirmed specifications. For internal parts, request exact-model support rather than treating these product references as a repair-kit recommendation.
Spring-washer FAQ
Is a dished washer necessarily damaged?
No. A conical spring is deliberately shaped. First identify what the component should be; appearance alone cannot determine its condition.
Can I replace it with a flat washer of the same diameter?
Matching diameter does not reproduce spring action, material requirements or the specified assembly. Use only the confirmed replacement.
Does changing spring orientation guarantee more usable drag?
No. General stacking principles do not establish the resulting line resistance, safe operating range or suitability of a modified reel.
Should every reel use the same spring arrangement?
No universal arrangement follows from the words spring washer or conventional reel. Use the exact design's documentation and service guidance.
The takeaway is simple: identify the job before ordering the part. A conical spring, a friction washer and a flat shim are not interchangeable solutions to a drag problem.