The high-low rig is the workhorse bottom rig for porgy (scup): two small hooks stacked above a bank sinker, presenting two baits at slightly different heights just off the seabed. Published angling guides describe it as the standard scup setup because it matches where scup feed and can produce double hookups when a school is thick. This guide walks through the rig's anatomy, published hook-spacing and sinker ranges, bait and bite timing, and safe unhooking, using stated figures from those sources rather than promised catches.
- Why two hooks
- Rig anatomy
- Hook size and spacing
- Sinkers and depth
- Baiting and bite timing
- Unhooking and handling
- FAQ
Why two hooks
Scup feed in frantic schools, and one published tackle guide notes that multiple baits attract several fish that become even more aggressive when competing for food. The same guide balances the benefit with the cost: more hooks increase the chance of the rig tangling and add difficulty when unhooking multiple fish. Massachusetts' official scup page describes a typical rig with one to three snelled hooks, so the two-hook high-low sits in the middle of that range. Scup are quick to grab bait but can be hard to hook, so presentation and timing matter as much as the number of hooks in the water.
Rig anatomy
Published rig descriptions share the same skeleton: a leader of roughly three to four feet, a swivel at the top for the main line, one or two dropper loops carrying snelled hooks, and a sinker loop at the bottom. One northeast tackle guide describes a four-foot, 30 lb fluorocarbon leader with a 50 lb barrel swivel and dropper loops tied above a bank sinker; another describes a shorter leader with two dropper loops six to eight inches apart and a surgeon's knot loop for the sinker. A three-way swivel version also appears in published lists, and one rig guide notes that straight-shanked hooks can reduce tangles. Details vary by author; what they share is the principle of hooks above, weight below.

Hook size and spacing
Porgies have small mouths, and published sources agree hooks should be sized down accordingly. Massachusetts' scup page lists snelled hooks from size #1 to #8 tied to loops six to ten inches above the sinker. A northeast inshore columnist recommends size #2 to #4 beak hooks with snells tied about eight inches apart above the sinker, while another guide suggests size 4 to 1 baitholder hooks or a small circle hook, noting that scup steal bait from anything too big. Spacing figures across sources range from roughly six inches to over a foot, so treat these as published starting points and adjust for your bait size and the snag risk around you.
Sinkers and depth
Published sinker figures also vary with depth and current: one columnist cites two to twelve ounces depending on current, a northeast guide lists two to eight ounces, and another source lists one to four ounces for calmer conditions. The common advice is to select the lightest sinker that still holds bottom in the conditions you face. One guide describes dropping straight down over structure, letting the sinker touch bottom, then lifting it an inch or two so the baits hover in the strike zone. If you are fishing shallow water, Maryland's fish facts page notes that scup can be boat shy and the best bite may come several feet behind the boat.
Baiting and bite timing
Massachusetts' guide lists sea worms, squid strips and pieces of clam or fish as working baits, and notes that squid strips are often favored because they last through a scup school's frantic attacks. Bait picked clean catches nothing, so check and re-bait often. The bite is often a quick tap-tap, and the same official page describes two responses anglers use: setting the hook as soon as the rod tip shows the slightest dip, or gently lifting the hooks off the bottom to provoke a sharper strike rather than nibbling.

Unhooking and handling
Unhooking is part of the rig's cost: a published tackle guide warns that porgies have very sharp dorsal spines that can puncture fabric and cause a nasty infection, and that multiple-hook rigs add difficulty when unhooking several fish at once. Work over a bucket or deck space where a dropped fish cannot escape, keep fingers away from the hook points, and use a tool rather than bare fingers when a hook sits deep. As an example of the tool class, the GOOFISH titanium alloy hook decoupler and remover kit is listed with titanium alloy construction, three interchangeable hook heads sized for different line classes, a spring-loaded lock and a compact closed length, in blue or pink color options. The listing's stated features are reproduced here, not independently tested.
FAQ
How far apart should the two hooks be?
Published figures range from six to ten inches above the sinker in Massachusetts' official description to about eight inches between snelled hooks in one columnist's rig, with some guides spacing loops wider. Start inside those ranges and adjust for bait size and tangles.
How many hooks should a porgy rig carry?
Massachusetts' page describes one to three snelled hooks as typical. More hooks put more bait in the water but also raise tangle and unhooking difficulty, according to a northeast tackle guide.
What sinker weight do I need?
Published lists span roughly one to twelve ounces depending on depth and current. Choose the lightest sinker that holds bottom, and lift it an inch or two off the seabed so the baits hover.
What bait works best?
Sea worms, squid strips and clam or fish pieces are listed by Massachusetts' guide, with squid strips noted for lasting through frantic school attacks. Keep baits small enough for the scup's mouth and re-bait often.
Should I buy a pre-tied rig or tie my own?
Pre-tied porgy rigs are widely available, and one guide notes that tying your own from leader with dropper loops lets you tune hook size and spacing. Either way, the same anatomy applies.
For bait preparation on this rig, see Frozen Bait for Porgy: Thawing, Drainage and Hook Fit, and for bite-side troubleshooting see Porgy Fishing: Why Your Bait Disappears Without a Hookup.
Rig descriptions and figures in this guide draw on published sources, including Massachusetts' official scup page, Maryland DNR's scup fish facts, The Fisherman's porgy tactics, New England Angling's porgy tackle guide and Guidepole's scup bottom-fishing guide.