Skip to content
Goofish® Rod-More than fishing
0 items in cart

Cart

Your cart is empty.

Pufferfish

Pufferfish Bycatch: Prepare for Release, Not a Photo

· Goofish®Rod-More Than Fishing

Empty landing net, pliers and folded landing mat beside turquoise water with the English headline Pufferfish Bycatch: Prepare for Release

A pufferfish appears beside the boat instead of the species you expected. The immediate temptation may be to lift it for a closer look, find the camera and watch it puff up. That is the wrong moment to start inventing a handling plan.

Prepare to release an incidental catch before it arrives. Keep the fish in the water where practical, minimize handling and do not deliberately provoke inflation. The useful achievement is an efficient, controlled release, not a more dramatic photograph.

This guide focuses on preparation for unwanted pufferfish encounters during ordinary fishing. Identifying what damaged a soft lure is a separate question; here, the fish is already at the end of the line.

Inflation is a defense, not a photo opportunity

Pufferfishes and related fishes include several different body forms and defensive adaptations. The Smithsonian's overview of pufferfishes and their relatives describes water inflation as one of those adaptations. A fish becoming rounder is not an invitation to keep interacting with it.

Do not chase, prod or repeatedly lift a fish to make it inflate. Do not squeeze an inflated fish or attempt to force it to deflate.

The Australian Museum's explanation of porcupinefish inflation identifies an additional concern: a porcupinefish inflating at the surface may ingest air that is difficult to expel, leaving it unable to leave the surface. That account concerns porcupinefishes; it should not be turned into a universal recovery timetable for every fish called a puffer.

The practical conclusion is straightforward: do not create or prolong an inflation event for entertainment. Keep unnecessary disturbance out of the release process.

Build the release route into the fishing position

A rail high above the water, a narrow gap between rocks and a low, stable platform present different problems. Before casting, ask how an unexpected fish could be managed without dangling it from the line or sending someone into an unsafe position.

Choose safe footing and an accessible working area. Keep loose tackle, open hook boxes and unused rods out of that space. Children and pets should not be able to approach an unfamiliar catch or exposed hooks.

From a boat, agree who controls the rod and who handles the release equipment. A second person should not begin pulling the leader while the rod holder is still winding.

If the site offers no safe way to manage an incidental catch, change the fishing position or method before the encounter. A convenient casting spot is not automatically a suitable landing spot.

Separate line control from body support

A taut line tells you where the hook is connected. It is not a substitute for supporting a fish appropriately.

Do not swing a fish onto the deck, suspend it from a hook-removal tool or lift it with the rod. Keep loose line clear of feet and fittings, and never wrap line around a hand.

NOAA's catch-and-release guidance recommends dehooking in the water whenever possible, minimizing handling and air exposure, and supporting the body if removal from the water is necessary. These are preparation principles, not a claim that one technique fits every species or capture situation.

Where suitable support is needed, have it ready rather than searching after the fish arrives. Choose equipment appropriate to the actual fish and access, and follow regional species-specific guidance. A net that is available but impossible to deploy safely does not solve the problem.

Three photographic panels showing a clear waterside working area, an empty landing net on a mat and pliers in a pouch, headed Ready Before the Encounter
Working space, suitable body support and accessible tools belong in the plan before an unexpected fish arrives.

Check the tool before you need the tool

Extracting a hook from a small mouth is not simply a matter of owning something labeled a dehooker. Hook position, tool reach, working clearance and the operator's experience all matter.

Recfishwest's blowfish-management guidance describes the difficulties posed by small mouths, strong jaws and inflation during handling. Treat that as a reason to prepare, not to apply more force.

If considering the GOOFISH hook remover kit, check the actual supplied components, reach and fit against the hooks you use. The product name does not establish suitability for every pufferfish, hook position or release situation.

Keep fingers away from the mouth and exposed hook points. Do not use a fish's jaws to hold a tool in place, and do not make a blind extraction attempt simply because the hook is difficult to see.

If removal is not straightforward, avoid prolonging the struggle. NOAA's general guidance favors cutting the line close to a swallowed hook that cannot be easily removed rather than persisting with extraction. Do not reach into a mouth to achieve that; use an appropriate, safe approach with experienced assistance and relevant local guidance.

Do not let the reel dictate the release

Stop treating the final approach as another retrieve. Once the fish is close, coordinate the rod, line and release equipment rather than continuing to wind until the terminal connection reaches the guides.

With a GOOFISH YB Series saltwater spinning reel, select the actual model for the intended outfit and its reference line capacity. The listed maximum drag is not an everyday setting and not permission to lift an unexpected fish.

Keep the rod angle and load manageable within the equipment's instructions. Tightening drag to speed up an awkward bankside situation does not create a safer working area or a better hook-removal route.

The answer may be a clearer handover between anglers, not a stronger pull. Agree the sequence before fishing so that nobody is improvising around a loaded rod and exposed hook.

Inspect the recovered rig before casting again

A successful release does not establish that the terminal tackle remains serviceable. With hooks controlled, inspect the leader, knot area, connection hardware and accessible mainline for damage.

For GOOFISH Max-8 braided fishing line, identify the selected option and actual rigging rather than inferring technical properties from the name. Replace questionable material following the relevant component instructions; do not make a hard pull against exposed hooks to prove it is sound.

A stronger mainline label does not protect the soft bait, prevent unwanted encounters or make hook handling easier. Keep line selection, leader condition and release preparation as separate checks.

Contain damaged line, used hooks and recovered lure fragments. Nothing becomes harmless litter simply because it came from fishing tackle.

If incidental encounters keep repeating, change the session

Repeated unwanted hookups are a reason to reassess the fishing, not an invitation to refine the photograph. Pause, move where appropriate or stop that presentation rather than deliberately creating more encounters.

A change of bait or lure does not guarantee species selectivity. Nor does a single uneventful cast prove that a change solved the problem.

Record what you actually observed: the identified or suspected fish, the method, hook location where visible, release difficulty and the decision to change or stop. Do not count a fish swimming away as proof of its long-term survival.

Pufferfish bycatch FAQ

Should I make a pufferfish inflate to identify it?

No. Use suitable regional identification references and observations that do not require additional disturbance. Inflation is not a reason to extend handling.

Should I squeeze an inflated fish to help it deflate?

No. Do not force deflation or improvise a puncture procedure. Seek experienced, species-appropriate guidance if release is not straightforward.

Does a long hook remover guarantee safe dehooking?

No. Reach, hook position, clearance and technique all matter. A tool is not a universal substitute for a release plan.

Is a stronger rod the solution to awkward handling?

No. A rod does not replace safe access, body support or suitable release equipment.

What is the best photograph?

One that does not add a handling step or delay release. If that opportunity is not available, skip it.

Clear the space. Prepare the tools. Skip the spectacle. Good bycatch preparation makes the encounter shorter and more controlled, without needing to make the fish more dramatic.


0 comments

Add a comment

Keep reading

More from Pufferfish

View all articles
  • Photographic pufferfish head close-up beside a shell inset, with the English title Pufferfish Teeth: How the Beak Renews.

    Do Pufferfish Regrow Their Teeth? Beak Renewal Explained

  • Representative porcupinefish head detail in an emerald and plum photographic composition with the English headline Puffer or Porcupinefish, Look Beyond Inflation

    Pufferfish vs Porcupinefish: Look Beyond Inflation

  • Damaged and intact translucent soft lures on an inspection mat with tackle-storage insets, headed Pufferfish or Plastic Failure?

    Pufferfish Biting Your Soft Plastics? Check the Missing Tail

Shop this guide

Gear mentioned in this article

  • GOOFISH® Titanium alloy hook decoupler / remover / unhooker kits

    GOOFISH® Titanium alloy hook decoupler / remover / unhooker kits

    Price: $49.80 USD
  • GOOFISH YB Series gray saltwater spinning reel held in hand, showing the metal spool, bail and rounded handle grip

    GOOFISH® YB Series Saltwater Spinning Reels | 5.9:1, CNC Aluminum

    Price: $398.00 USD

Field notes

Get new fishing guides in your inbox

Practical rod, reel and technique guides from the GOOFISH® blog. Unsubscribe anytime.