GOOFISH® Abyss Jigger Gen 1 Jigging Reel | 6.08:1, CNC Aluminum

The GOOFISH Abyss Jigger Gen 1 saltwater jigging reel combines a 6.08:1 gear ratio, CNC-machined aluminum construction and a ball-style metal grip for vertical and slow-pitch jigging setups. Choose Blue/Silver or Navy Blue/Gold, with separate left- and right-hand retrieve options.

Before your next trip, choose the hand you use to wind, match the reel to a compatible rod seat and spool it with suitable line. The Gen 1's open frame, machined handle arm and perforated spherical grip give this model its distinctive appearance.

Made for vertical and slow-pitch jigging

Choose the Abyss Jigger Gen 1 for a saltwater vertical or slow-pitch jigging setup with 6.08:1 gearing, a CNC-machined aluminum body and a ball-style metal grip. Match your rod, line and jig to the fishing conditions rather than choosing by maximum drag alone.

Specifications

Weight and line capacity are approximate. Actual capacity depends on line diameter and packing. Retrieve changes with spool fill; 30.06 inches is a reference value rather than a fixed amount at every spool level. Maximum drag is not a recommended everyday setting or a fish-lifting rating.

Choose your retrieve hand and color

Select Left if you wind with your left hand, or Right if you wind with your right hand. Each retrieve option is available in Blue/Silver and Navy Blue/Gold. All four listed combinations use the 6.08:1 gear ratio and 30.06-inch reference retrieve. Check the full selection before ordering; do not assume the handle can be switched between sides.

Gen 1 component details

• Ball-style metal grip with visible perforations.
• Machined metal handle arm with an elongated cutout.
• Aluminum reel foot secured with four visible screws.
• Open-frame spool access and external drag controls.

Check that the reel foot fits your rod seat and that the reel sits securely before fishing. Use the supplied instructions for drag adjustment; do not confuse the spool-release control with the drag setting.

Build a matching jigging setup

Match rod, reel, main line, leader, knots and drag as a complete system. Choose jig weight for the rod and fishing conditions; line capacity alone does not establish a guaranteed fishing depth. Set drag conservatively for the weakest part of the setup and use appropriate landing equipment rather than lifting fish with the reel or rod.

Compare models in the slow jigging rod collection, or browse fishing jigs for your next setup.

Product detail gallery

Retrieve and spool fill

The reference calculation uses the reel's 6.08:1 gearing and different spool-fill diameters. A fuller spool retrieves more line per handle turn than a nearly empty spool.

Care after saltwater use

A brief cleaning routine after each saltwater session helps keep exterior salt residue from accumulating. The reel's supplied maintenance instructions take priority over general care advice.

1. Remove salt: wipe exterior surfaces and the grip with a soft cloth lightly dampened with fresh water.
2. Clean gently: use a soft brush on accessible exterior crevices. Avoid pressure jets, immersion, abrasive cleaners and solvents.
3. Dry fully: air-dry in a shaded, ventilated place before storage. Do not seal a damp reel in a bag or case.
4. Inspect before use: check line abrasion, knots, the handle and visible fittings; test winding and drag gently before fishing.
5. Store dry: keep the reel in a dry, ventilated location. An anodized finish does not remove the need for saltwater care.

Where should I add oil or grease?

Use only the lubricant, locations and service intervals specified in the supplied manual. Do not spray oil into bearings or drag parts indiscriminately. If model-specific instructions are unavailable, ask for service guidance before opening the reel. After immersion or persistent grinding, avoid further use until the reel has been inspected.

Everyday questions and troubleshooting

Why is line building up on one side of the spool?

Watch the line lay while winding. Maintain steady tension and guide the line evenly across the spool as needed, following the supplied instructions. Avoid overfilling. Stop and clear loose loops or tangled line before continuing. Keep fingers clear of moving parts and never wrap loaded line around your hand.

Why does line release more easily than expected?

Check the drag setting, knots and line attachment to the spool. Test gently in a safe area with hooks and lures secured away from people. Choose a conservative setting suitable for your line, leader, knots and rod; do not tighten to the listed maximum simply to stop line release. If the controls do not respond normally, stop use and seek service.

What if winding feels stiff or rough?

Remove line tension safely and inspect for tangled line or visible debris. Do not force the handle or use it to free a snag. If the reel remains rough without load, starts grinding or shows inconsistent drag, stop using it and arrange inspection. Do not open the reel or spray lubricant into internal parts as a quick fix.

What should I do about new noises or a loose handle?

Stop fishing and inspect the handle and visible fittings. Follow the model's instructions for any external adjustment; do not overtighten fittings or guess an internal repair. Continued noise or play calls for service rather than further use.