You can change the handle side on many spinning reels, but you must first confirm that your exact model allows it and identify how the handle attaches. A through-shaft handle and a screw-in handle do not come apart in the same way. If the mechanism is unclear, stop before applying force.
This guide is a decision process for changing retrieve sides, not a universal disassembly instruction. It does not cover opening the gearbox or converting a fixed-hand baitcaster.
First separate three different handle features
Changing sides moves the winding handle from one side of the reel body to the other. Folding reduces its storage outline. Replacing substitutes another handle or knob. A reel can offer one feature without supporting the others.
The side you wind with is a practical preference, not a rule determined by your writing hand. With hooks removed and no fishing load, hold the outfit in each intended position. Consider which hand comfortably controls the rod, which turns the handle, and whether either position crowds your wrist.
Through-shaft or pin-through attachment
In this family, a shaft passes through the body and is retained on the opposite side. Daiwa's explanation describes sliding the shaft through and securing the retaining part. Lew's also describes models where the handle shaft is held by an opposite-side cap. Do not assume that turning the crank backward is the release procedure for this design.
Screw-in attachment
Here the handle threads into its receiving connection. Daiwa and Lew's describe examples that release by backwinding and tighten by forward winding, with the opposite opening covered by a cap. That explains the design distinction; it is not permission to use the same motion, restraint method or tightening force on every reel.
Use the instructions for the exact model and generation to establish the removal direction, any component that must be held, and the refitting procedure. Avoid a universal clockwise instruction: side, viewing direction and attachment design can change what that description means.
For the original explanations, see Daiwa's handle-design guide and Lew's side-swap guide. Their procedures apply to the designs they describe, not automatically to a different brand's reel.

A contained workspace matters more than speed
Make the swap on a stable, dry surface rather than over water, gravel or a boat drain. Remove the hook or lure and keep loose line controlled. Use a shallow tray and photograph the original arrangement before removing the permitted parts.
- Identify the exact reel. Record the model, size and generation. A size number alone is not an assembly instruction.
- Find the approved side-change procedure. Confirm that the handle is reversible and distinguish the handle retainer from unrelated controls.
- Keep removed pieces in order. Retain any washer, spacer or seal exactly as the instructions require. Do not add or discard a piece because another reel lacks one.
- Refit only the intended parts. Follow the stated sequence and tightening guidance. Never use pliers to overcome an unexplained refusal to seat.
- Stop at uncertainty. A missing part, damaged thread or unexplained resistance calls for identification or service, not more force.
The opposite-side cap belongs to the handle arrangement. Do not treat it as a drag control or compensate for a loose assembly by changing the fighting drag. Similarly, a folding joint must be secured by its own approved method; moving the handle to the other side does not lock that joint.
After the swap: check without a fishing load
First inspect the fitted handle and opposite-side closure. Check that the assembly is seated as the manual describes and that no loose piece remains unidentified. If it looks different from the specified arrangement, resolve that before winding.
Turn slowly and feel for a change
With no hook attached and no tensioned fishing load, rotate the handle gently through several turns. Observe the rotor and spool during the normal retrieve. Look for contact, an unseated handle or a new rough spot. Do not accelerate through a bind to see whether it clears.
A free-turning check is not proof of loaded durability. It is a way to notice obvious assembly problems before fishing. New grinding, binding or looseness after the change is a reason to stop, compare with the instructions and seek service when needed.
Check the outfit, not just the loose reel
Mount the reel on its compatible spinning rod and confirm normal reel-foot security. Hold the outfit in the position you intend to use. Check wrist clearance and access to the handle, bail and drag control without forcing your grip into an awkward position.

A reversible reel is a feature to verify, not a complete fit guarantee
The Backcountry 1000 freshwater spinning reel is listed with a left/right-interchangeable folding handle arrangement, a metal spool and 5.4:1 gearing. Those specifications establish the stated feature, not the exact attachment mechanism or removal sequence. Follow its supplied instructions before changing sides.
Its current selection is labelled 1000size. The supplied-item description mentions two folding handles and two metal line cups; confirm the exact included pieces if a particular spare is important. That wording does not mean two reels, nor does it establish compatibility with another reel's handle.
For a rod-side comparison, the GOOFISH 180cm Light trout spinning rod is a two-section model supplied with two L-power tips, one being an additional spare rather than a different power option. Its listing separates the rod-only choice from Rod&Reel(1000size). Confirm the selected package and actual reel-seat fit. The legacy URL wording does not change the two-L-tip specification.
These are relevant configuration references, not a claim that a handle swap has been tested on the supplied outfit. Choose line and operating loads from the complete setup's guidance, independently of which hand winds.
Spinning reel handle swap FAQ
Can every spinning reel change sides?
No universal assumption is safe. Check the exact model's instructions. A removable cap or a similar-looking reel photograph is not enough to establish reversibility.
Does changing handle sides reverse the reel's normal retrieve?
Choose the normal winding motion described by that reel's instructions after refitting. Do not use the anti-reverse control as a substitute for correct assembly or keep turning against resistance.
Can I install a longer aftermarket handle at the same time?
Treat that as a separate compatibility decision. A shared size label or similar shaft appearance does not establish matching threads, retained parts or clearance. Keep the original approved configuration for the side change unless the maker confirms the replacement.
What if the handle is stiff only after moving it?
Stop winding. Recheck the permitted assembly sequence, retained parts and seating against the exact instructions. Do not remove washers at random or force the crank. If the cause remains unclear, seek service before fishing.
Takeaway: confirm reversibility, identify the attachment, contain every part, and check the refitted outfit without load. A comfortable retrieve side is useful only when the assembly is correct.