GOOFISH® LOOPVALE 9054 Fly Rod | 9ft 5wt 4-Piece

LOOPVALE 9054: a focused freshwater fly rod

The GOOFISH LOOPVALE 9054 is being developed for single-handed freshwater trout fly fishing with floating #5 lines, dry flies and small, light nymphs. Its four-piece format, natural cork grip and Violet Cork finish give it a clear role beside our spinning and boat-fishing rods. One model and one finish are proposed, rather than an untested matrix of lengths and powers.

Development status

Every new dimension, rating, material selection, mass and balance value below is a development target pending engineering approval and physical sample validation. FUJI components are procurement candidates, not confirmed installed parts. Images are design renders, not product photography or manufacturing drawings. This draft is not approved production stock.

Choose the method, not a universal rod

This is a fly rod: its reel seat is behind the cork hand grip, with no casting trigger. It is neither a spinning rod nor a baitcasting rod. Intended users fish accessible river banks, safe wading positions and open lake margins with room for a backcast or roll cast. It is not a heavy-streamer, sinking-head, saltwater, Spey, euro-nymph-specialist, jigging or fish-lifting rod. A 9ft rod needs space; it is not our recommendation for tight brush tunnels.

Model selection and specification targets

Fly-line class describes line mass, not fish size, rod lifting capacity or a lure-weight rating. A heavier-than-standard line labeled #5 needs separate casting approval. Capacity and target mass are not test results. Every target above remains sample-validation pending.

Design images and coverage limits

These renders show overall appearance, four separate sections, cork and reel-seat placement, butt cap, joint, tip and guide details. Rendered guide counts and stations, seat hardware and joint geometry are illustrative and are not a verified match to the candidate BOM or dimensioned engineering layout. Original GOOFISH wordmark reproduction and actual-scale physical markings are not approved. No image is a manufacturing template or evidence of fit, load rating or sample performance.

Grip layout and material choice

Development handle chain, butt datum x=0mm: elastomer cap0–6; fly-seat assembly reserve6–126; lime EVA transition collar126–136; natural cork reversed half-wells grip136–311; winding-check reserve311–316; exposed blank forward of316. Main cork grip target175mm long, maximum palm diameter27mm, front nose17mm and rear22mm. Seat hardware envelope target23mm maximum diameter; cap22mm. These are design inputs, not machining tolerances. No separate foregrip, long rear handle or fighting butt is proposed.

Natural cork is selected for the intended single-hand contact and appearance, not a tested superiority claim. Full EVA was considered for color and cleaning but not selected as the main contact surface. Composite cork binder samples and carbon-grip cold/wet suitability are unverified. EVA participates as a lime accent collar, with a violet elastomer cap. Wet-hand, thin-glove, cold, staining, cleaning, UV and aging trials remain required. Cork grade, filler, binder and glue need supplier approval.

Candidate components and fit

• Blank: tubular carbon composite; no confirmed carbon brand, modulus, resin, layup or wall thickness.
• Strippers: FUJI CCLNAG-12 and CCLNAG-8, one each. Seller-table nominal sizes12/8, double-foot stainless frosted-silver frames with Alconite. Published height/overall length17.5/25mm and12/20mm respectively. Nominal ring size is not guaranteed clear inner aperture.
• Runners: FUJI CCLAG-6, eight candidates; single foot, frosted-silver stainless/Alconite. Published H8mm, foot7mm, overall10mm. Ceramic runner mass and line passage require evaluation against the finished mass/recovery targets.
• Tip: FUJI CCLGAT family, nominal size6 candidate. Bore, tube length and complete order code are unselected until finished tip diameter, coating and adhesive allowance are measured. No forced-fit or structural-tip sanding assumption.
• Fly seat: FUJI SKDPS F CC size16 fixed hood plus SKDPS NSD CC size16 thread/nut candidates. Final supplier order syntax and assembly are pending. Catalog size16 chart lists46.5/15/43.3mm component lengths,15.5mm ID and18.3mm OD; not an approved assembled-seat length.120mm is our design reserve, not a copied catalog body length.
• Natural cork grip, EVA collar, elastomer cap, winding check, arbors, adhesive, wraps and sock/case require current quotation and sample sign-off.

Trial guide center stations from the butt, mm:610,985,1280,1545,1770,1970,2160,2330,2480,2620 plus tip2743.2. These are development inputs only. Final positions require the actual reel, static line path, leader-loop passage and casting trials; do not derive spacing or guide count from an effect image. Do not bridge section joints with wraps.

Violet Cork appearance

Lower exposed S1 blank: PANTONE2725C violet reference, natural-graphite upper sections. Violet seat insert and cap, natural cork grip, PANTONE389C lime EVA collar and sparse lime alignment/trim accents, violet guide wraps, native silver hardware. PANTONE references are not formulas or measured render matches. Coating, metal, foam/elastomer, thread and ink each need separately signed physical masters. Keep paint and ink off threads, mating surfaces and adhesive lands.

The approved connected-double-O GOOFISH wordmark must use original artwork, without stretching or redrawing. The supplied photographed bitmap is not a production vector. Proposed blank artwork box34×6mm atx330–364 and butt-face16×4mm box need vector and curved-surface print approval. Series/model atx375–425; English target marking atx435–515:9FT | #5 | 4PC | MOD-FAST TARGET. Section IDs and alignment marks stay away from insertion lands. Rendered lettering is not approved production artwork.

Loads, drag and release testing

No working-force, recommended reel-drag, proof-force or destructive-force number is assigned. A #5 line class, Power word or target fish cannot establish those forces. Engineers must approve separate rod working-load, drag, knot/system-strength and sacrificial destruction criteria.

The proposed guarded test setup supports the cork atx180–305mm, initial butt axis horizontal, guides down, line through every guide from a compatible reel/anchor to a calibrated force transducer beyond the tip. Investigative line angles30/45/60° are measured below the original butt axis, not from a changing tip tangent. Clamp pressure, load limits, ramp rate(N/s), hold(s), cycles, residual-set and migration tolerances remain engineering-pending. Tests cannot start until a signed worksheet fills those values. Three independent nondestructive prototypes and three separate destructive samples form an initial development plan, not reliability certification.

The engineer checklist includes bend/recovery and casting; working load versus drag; wet/dry knot strength; proof and remote destructive characterization; three ferrules; reel-foot retention and nut travel; guide/tip bonds and line-coating passage; wet/gloved/cold grip and finish aging; and measured mass, balance and actual case packing. Full fixture/load/path/rate/time/cycle/sample/acceptance fields are in the separate development record. Destructive samples never return to fishing use.

Care and limitations

Seat and align sections using the approved fit, never by pulling guide frames. Keep cork and guides clean, dry completely before packing, inspect ferrules and reel attachment before each trip. Use landing equipment rather than lifting fish with the rod. Stop use after damage or unusual movement. No warranty, impact tolerance, saltwater rating or waterproof claim has been validated for this design.

Evidence and approval status

Sources checked through retrieved extracts on8November2026: Redington Classic Trout590-4 USD199.99; ECHO Carbon XL590-4 USD289.99; FUJI distributor/retailer component charts; specialist reproductions of the single-hand fly-line standard; official PANTONE color references. These establish category context and candidate identities, not demand, costs or sample performance. Competitive action descriptions are inconsistent; no competitor warranty or performance claim is transferred.

• Redington590-4
• ECHO Carbon XL
• FUJI LN dimensions
• FUJI L guides
• FUJI fly-seat candidates
• FUJI catalog2021
• Fly-line standard reference
• PANTONE2725C
• PANTONE389C