The GOOFISH Mighty Deep 300g and 700g rods share a nominal 6ft length, but they are not the same outfit with different maximum numbers. The 300g model lists PE1.5–4 and an 80–250g recommended jig range. The 700g model lists PE4–7 and a 200–550g recommended range. Their construction and reel options also differ.
Start with the jigs you regularly use and the reel you intend to pair with the rod. A larger maximum rating is not, by itself, a reason to choose the heavier-rated model. This is a specification-based comparison, not a field test or a ranking of fish-catching performance.
Mighty Deep 300g vs 700g: the key specifications
| Specification | Mighty Deep 300g | Mighty Deep 700g |
|---|---|---|
| Listed length | Approximately 183cm | Approximately 183cm |
| PE line class | PE1.5–4 | PE4–7 |
| Recommended jig range in the chart | 80–250g | 200–550g |
| Listed maximum jig weight | 300g | 700g |
| Construction options | One piece or two-piece butt joint | One piece |
| Reel configurations | Spinning or casting | Spinning, standard casting, left spiral-wrap casting or right spiral-wrap casting |
The 700g product titles may describe a 200–700g range. Its specification chart separates the narrower 200–550g recommendation from the 700g maximum. That distinction matters when choosing a rod for regular use rather than simply comparing the largest figures.
Choose a jigging rod around your regular jig weights
If most of your planned jigs sit between 80g and 180g, the Mighty Deep PE1.5–4 jigging rod places those weights inside its stated recommendation. They are below the PE4–7 model's recommended starting point.
If you regularly need 350–500g jigs, the Mighty Deep Pink PE4–7 slow pitch jigging rod places them inside its recommendation. Those weights exceed the 300g model's maximum.
The recommendations overlap between 200g and 250g. In that zone, jig weight alone does not decide the purchase. Compare your intended line class, reel configuration and transport needs. Similar compatibility on paper does not establish identical loading, recovery or feel.
These are examples for reading the specifications, not universal depth prescriptions. Current, drift, line resistance and jig design influence the weight needed for practical control. Do not select a heavier jig simply because the rod's maximum allows it, and do not exceed the rod's guidance to compensate for difficult conditions.
Read PE line class separately from pound test and drag
PE1.5–4 does not mean 1.5–4lb, and PE4–7 does not mean 4–7lb. PE designations are line-sizing classes, not universal breaking-strength conversions. Check your actual braided fishing line's diameter and stated strength, the reel's usable capacity and your leader and connections.
A PE rating also does not establish a recommended reel-drag setting. Product images include load demonstrations, but static loads and fishing drag are different measurements. Neither model's maximum jig number tells you how heavy a fish you can safely lift with the rod.
Do not tighten drag toward a load-test figure simply because it appears in a graphic. Follow guidance for the complete outfit, avoid high-sticking and use suitable landing equipment.
One piece or butt joint: a transport decision
The 300g listing offers two-piece butt-joint models with an approximately 132cm packed length. The joint is near the handle, not halfway along the blank. It reduces transport length without making the rod a short-section backpacking design.
The 300g one-piece models and the 700g models need room for approximately the full 183cm length. Check your vehicle, storage space and travel operator's requirements before ordering. A shorter rod section is not automatically permitted in cabin baggage.
If a 132cm packed rod solves your transport problem but you regularly need jigs above 300g, do not ignore the rating to obtain that convenience. Transport suitability and fishing suitability must both be satisfied.
Compare weights within the correct configuration
- 300g one-piece spinning: approximately 178g.
- 300g one-piece casting: approximately 183g.
- 300g butt-joint spinning: approximately 193g.
- 300g butt-joint casting: approximately 198g.
- 700g standard spinning: approximately 228g.
- 700g standard casting: approximately 218g.
These are listed finished-rod weights, not blank-only weights. Separate weights for the 700g spiral-wrap options are not specified in the chart, so do not assume the standard casting figure applies to every guide layout. Rod weight alone also does not predict how an outfit balances with your reel.
Match spinning, casting and spiral-wrap layouts to the reel
Spinning and casting configurations are not interchangeable. Choose the rod layout for your compatible reel before selecting the finish or section design.
The 700g range additionally offers left and right spiral-wrap casting options. Its variant names specify left spiral wrap for right-handle reels and right spiral wrap for left-handle reels. Guide-wrap direction is not the same label as reel-handle side.
Read the full option names on the Mighty Deep Green spinning and spiral-wrap casting configurations before ordering. The 300g listing offers standard spinning and casting models, not those same spiral-wrap choices.
FUJI components: compare the complete configuration
The Mighty Deep product material identifies FUJI components with a SiC tip-top and Alconite inserts in the other guides. The 300g model lists K-series guide frames, a FUJI reel seat and EVA grips; the 700g material identifies K or KW frames and a FUJI seat with a locking nut.
Frame series and insert material are different specifications. A SiC tip-top does not imply a complete set of SiC inserts, and a shared component brand does not establish identical guide spacing or rod action. Check the selected model rather than transferring specifications between colors or line classes.
Similarly, Solid Nano is the listed blank terminology, not a guarantee that the rod is unbreakable. These component descriptions help identify the product but cannot replace appropriate handling or establish a performance ranking without testing.
A practical model-selection checklist
- Write down the jig weights you use most often, not only the heaviest jig in your tackle box.
- Compare those weights with each recommended range and record the maximum separately.
- Confirm the actual braid specifications and reel compatibility rather than converting PE numbers directly to pound test.
- Choose spinning, standard casting or the appropriate listed spiral-wrap configuration.
- Measure your available transport space and check whether a butt joint is genuinely useful.
Choose the Mighty Deep 300g spinning or casting model when its 80–250g recommendation, PE1.5–4 guidance and available construction match your routine. Consider the PE4–7 Pink or Green model when the higher recommended range and reel options suit your intended setup.
Frequently asked questions
Is the 700g model automatically better for large fish?
No. A maximum jig rating describes jig guidance, not a guaranteed fish size or lifting capacity. Choose a complete, compatible outfit and suitable landing equipment.
Can I cast a 300g jig because the rod says max 300g?
Do not interpret vertical-jigging guidance as a casting-weight rating. Follow model-specific instructions for the intended technique.
Which model should I choose for 200–250g jigs?
Both charts include that interval in their recommendations. Use line class, reel layout and transport requirements to narrow the choice. A specification sheet cannot establish identical feel.
Does the 700g rating mean the recommended range ends at 700g?
The chart lists 200–550g as the recommended range and 700g separately as the maximum. Keep both numbers visible when comparing the models.
Bottom line: Choose the Mighty Deep configuration that fits your regular jig range and complete setup. The maximum number is a limit to understand, not a performance score.
Leave a comment