A metal jig has a connection eye at each end. One looks much like the other, and reversing the lure seems like an easy way to change its action. But does the second eye mean either end can carry the towing connection?
Not by appearance alone. Two attachment points do not establish interchangeable roles. Start with the exact jig's intended arrangement before changing which end connects to the leader.
For boat-based pollock jigging, this is a rig-identification question before it becomes a presentation experiment. A new orientation is not automatically a remedy for a poor drift or a fouled hook.
Define top by function, not by the packet artwork
In a rigging conversation, top usually refers to the end used for the intended towing connection. That does not mean the end nearest the printed logo or the one pointing upward in a display photograph.
The tow point is where the leader-side connection applies input to the assembly. A hook-attachment point has a different role, although some approved arrangements place towing and assist-hook connections within the same end assembly.
Do not assume every jig uses the same sequence of knot, solid ring, split ring and hook. Identify the method for the particular design rather than copying an unexplained photograph.
Similar eyes do not prove a symmetrical jig
Two comparable-looking holes can sit on a body with different thickness, profile or mass distribution along its length. A front-view photograph may not reveal those differences.
Body symmetry also does not, by itself, document an approved alternate rig. The attachment hardware, hook layout and intended method still matter.
Conversely, an asymmetrical jig may have more than one manufacturer-supported arrangement. The useful distinction is not simply symmetrical versus asymmetrical; it is verified use versus an assumption.
Paint, an eye graphic and a color transition can help identify a product, but do not treat decoration as a rigging instruction unless the maker explicitly says it is one.
Changing the tow point changes more than the label
Moving the leader connection changes where input reaches the body. Depending on the design and complete assembly, that can change orientation, movement and the relationship between the hooks and leader.
It does not follow that reversing always creates a slower fall, more flutter or a better pollock presentation. Those outcomes require observation of an appropriate arrangement, not a promise based on the number of eyes.
Finding a balance point or inspecting the body shape does not independently establish the intended tow point. Nor does a successful fish encounter certify an undocumented configuration.
Use a three-part identification check
Identify the exact model. Retain useful packaging, model names and the maker's relevant rigging information. Similar finishes can conceal different products.
Confirm the towing connection. Establish which point and connection method the maker specifies for the intended presentation.
Confirm the hook arrangement. Check which attachment points, components and clearances belong to that method.
If the information remains unclear, ask the supplier or use a jig with a documented arrangement. Do not resolve uncertainty by attaching at random and pulling harder.
Inspect both eyes without inventing a strength test
With hooks controlled and the rig unloaded, look for visible deformation, rough contact areas, cracks or damaged connections. Different jig constructions can use different eye designs; their appearance is not a universal strength rating.
Check that the chosen connecting component fits and can sit as intended. A crowded connection or incompletely closed component can create a problem even when each part has an impressive label.
Do not file, drill, bend or enlarge an eye to make an unsuitable component fit. Do not hang improvised weights or pull against a bent rod to prove that an uncertain eye is acceptable.
Damaged or questionable parts need the appropriate replacement or manufacturer assessment. An undamaged-looking surface does not provide a measured residual strength.

Hook clearance is part of the whole arrangement
An assist cord, hook or leader can catch the body or another component as the jig changes position. Adding hooks at both ends is not an automatic improvement.
Use compatible hook dimensions, cord arrangement and connecting hardware for the design. Do not prescribe one cord length or hook size from the word pollock alone.
After suspected fouling or structure contact, recover and inspect before continuing. A tangled assembly is a poor baseline for deciding whether the chosen orientation works.
A short observation in safe, visible water can help identify obvious interference, where the method and working position permit. Keep hooks clear of hands and people, and do not treat a near-boat check as proof of behavior at depth.
Match the outfit after identifying the rig
Jig orientation and rod selection are separate decisions. Use the actual assembly and intended presentation to assess the outfit; do not reverse a jig to make an unsuitable load appropriate for a rod.
Three rod references with different working ranges
The GOOFISH Ares Light jigging rod lists approximately 172 cm length and a 40–150 g jig range, with separate spinning and casting configurations and one-piece or butt-joint choices.
The GOOFISH Purple Ares Light lists 190 cm butt-joint construction, a 60–250 g jig range and PE1.5–4 line class.
The GOOFISH Ocean Assassin MH jigging rod lists approximately 193 cm one-piece construction, Fast action, a recommended 200–650 g jig range and PE3–6 guidance.
These are specification references, not three compulsory pollock outfits. Choose a suitable model and configuration for the actual trip. None of these ranges documents the tow point of an unrelated jig, supplies a casting allowance or permits lifting fish with the rod.
Reel and line still require their own compatibility checks
The GOOFISH Edge Jigger 30 jigging reel lists a 4.92:1 ratio and separate left- and right-hand retrieve choices. Confirm the selected version and physical fit with a compatible overhead rod configuration.
When comparing GOOFISH Max-8 braided line, check the actual option, capacity requirements, leader and connections. PE class is not an exact pound-test conversion, and a breaking-strength label does not rate every part of the assembly.
Do not tighten drag or use stronger line as a substitute for resolving an uncertain attachment method. Match the complete system and prepare suitable landing equipment.
Keep presentation problems separate
If the rig is correctly identified but control remains poor, reassess the actual drift and working layer. The Atlantic pollock jigging guide covers that different question.
If the trip's target name is unclear, use the pollock and saithe planning guide before transferring tackle advice between fisheries.
A useful note records the exact jig, documented attachment method, complete hook arrangement and observed outcome. Do not credit an orientation change for a result that also followed a different drift, weight or location.
Pollock jig attachment FAQ
Can either eye always be the top?
No. Confirm the exact design's intended towing and hook arrangements.
Does the heavier-looking end identify the correct connection?
Not reliably. Appearance alone does not establish mass distribution or approved use.
Should I add hooks to both eyes?
Not automatically. Follow the suitable documented arrangement and check clearance.
Can a rod's jig range tell me how to attach the jig?
No. Load compatibility and lure rigging are separate checks.
Verify the connection before experimenting with the presentation. Two eyes offer a question to answer, not permission to guess.